Kingsman ZCVRB47 - Zero Clearance Direct Vent Linear Gas Fireplace

This stylish Kingsman ZCVRB47 gas fireplace has an expansive glass viewing area coupled with clever designer options allowing for customizing the look to your taste - and this is only a portion of this Kingsman Zero Clearance model's allure.

The chase of the appliance may be vented to achieve Cool Touch Walls or reduced Mantel Clearances.

The following options are available to vent the chase:

• The top of the chase can be left open.
• A grill can be installed on the front of the chase.
• If the chase bumps out into the room, side grills can be installed on each side of the chase.

Minimum enclosure height for a vented chase is measured from bottom of fireplace, ventilation of minimum free air opening is required. Choose between our Enclosure Grills (Front or Sides) or Custom Grill (if custom grills are used the louvers cannot slope) or adequate ventilation opening as stated in the manual. Grill or opening must meet minimum (as specified in the installation manual) of chase top/ceiling.

This Vented Gas Fireplace, Includes: Linear Burner  Bronze Glass Media, SIT Valve with Hi/Lo Flame Adjustment, Safety Screen, 4/7" Top Flue, Tempered Glass 40 5/8 W x 13 7/8" H, 24,500 BTU
Framing 47" W x 38 3/4" H x 18 1/4" D, (Maximum Glass Media 5 LBS)

SPECIFICATIONS

SPECIFICATIONS WITH OPENINGS (MIN. NO GRILLS)
ZCVRB47 – 105 sq/in.

Min. Enclosure Height
ZCVRB47 – 70”

Min. Opening Below Ceiling
ZCVRB47 – 1-1/4”

SPECIFICATIONS WITH GRILLS (MIN. AIR FREE OPENINGS)
ZCVRB47 – 105 sq/in.

Min. Enclosure Height
ZCVRB47 – 70”

Grill Opening (Max. Distance from top of Ceiling)
ZCVRB47 – 2”

DOCUMENTATION

Manual
Brochure