VALCOURT WATERLOO - WOOD FIREPLACE

The Valcourt Waterloo FP15 High Efficiency Wood Burning Fireplace Complete With Crown Style Faceplate, And Classic Brick Panels. The Waterloo Fireplace Is Capable Of Heating Up To   2,800 Square Feet With It`s Powerful 95,000 Btu Output. 

Imagine a Gigantic High-Efficiency Fireplace

This fireplace is startling in size and is a logical and environmentally friendly option for any homeowner looking to combine style and high efficiency. With its ornamental façade, it will be the focal point of any room.

Large wood fireplace. Behind its large glass door, the 4.3 cubic foot combustion chamber can hold an impressive 60 lb of wood.

Low emissions. This energy efficient fireplace complies with the EPA’s clean-air standards (only 1.6 g/hr of emissions).

High efficiency. The FP15 fireplace is capable of heating large spaces and burns for 10 hours.

FEATURES:

• 95,000 BTUs
• Heating area of up to 2,800 sq. ft.
• Optional Chimney Kit

Appliance performance ⁽¹⁾

⁽¹⁾ Values are as measured per test method, except for the recommended heating area, firebox volume, maximum burn time and maximum heat output.

^(*) Recommended heating area and maximum burn time may vary subject to location in home, chimney draft,heat loss factors, climate, fuel type and other variables. The recommended heated area for a given appliance is defined by the manufacturer as its capacity to maintain a minimum acceptable temperature in the designated area in case of a power failure.

⁽²⁾ The maximum heat output (dry cordwood) is based on a loading density varying between 15 lb/ft³ and 20 lb/ft³ and reloading intervals ranging from 60 to 120 minutes. Other performances are based on a fuel load prescribed by the standard without any reloading between start and finish. The specified loading density varies between 7 lb/ft³ and 12 lb/ft³. The moisture content is between 19% and 25%.

⁽³⁾ As measured per CSA B415.1-10 stack loss method.

⁽⁴⁾ Higher Heating Value of the fuel.

⁽⁵⁾ Lower Heating Value of the fuel.

⁽⁶⁾ Performances based on a fuel load prescribed by the standard at 7 lb/ft³ and with a moisture content between 19% and 25%.

⁽⁷⁾ Optimum overall efficiency at a specific burn rate (LHV).

⁽⁸⁾ The optimum heat transfer efficiency is for the low burn rate (using HHV) and represents the appliance’s ability to convert the energy contained in the wood logs into energy transferred to the room in the form of heat and does not take into account the chemical losses during combustion.

⁽⁹⁾ This appliance is officially tested and certified by an independent agency.

⁽¹⁰⁾ Carbon monoxyde.

General features

GUIDES

FP15 Waterloo wood fireplace install & owner's manual
FP15 Waterloo wood fireplace dimensions
VA15FA06 - Faceplate Installation Instructions
FP15-Quick Installation Guide

PLANS & CAD

2D Diagrams - FP15 - DWG File
2D Diagrams - FP15A - DXF File