The Osburn 2000 Wood Burning Fireplace Insert, Solid Construction, efficient heating. Please choose a door overlay, Faceplate and Faceplate Trim kit to complete your new Osburn fireplace insert. We offer chimney liner kits to complete your Osburn Fireplace insert installation under the chimney components tab in our menu. If you have any questions please don`t hesitate to give us a call 1-855 485 4015.
2000 WOOD INSERT
|Fuel type :||Dry cordwood|
|Heating area :||500 - 2,100 Ft2|
|Maximum heat output :||
75,000 BTU/h (22.0 kW)
With its 2.4 cubic foot firebox, the Osburn 2000 insert offers an alternative to the people who love its freestanding counterpart. The two models share the same high quality combustion properties and many of the same features.
This appliance comes with a standard high-power, heat-activated 120 CFM fan strategically positioned to redistribute the heat from the firebox into the room.
The 2000 model is designed to receive an optional faceplate that can cover a masonry hearth up to 32 inches (81 cm) high and 50 inches (127 cm) wide. The door overlay is available in black or brushed nickel plated finishes and the faceplate trims too.
95% of the last 43 homeowners who have registered their warranty are satisfied with this product.
Appliance performance (1)
|Fuel type :||Dry cordwood|
|Recommended heating area (sq.ft.) : ()||500 - 2,100|
|Firebox volume (cu. ft.) :||2.4|
|Maximum burn time : ()||8 h|
|Maximum heat output (dry cordwood) : (2)||75,000 BTU/h (22.0 kW)|
|Overall heat output rate (min. to max.) : (2) (3)||12,500 BTU/h (3.7 kW) to 31,300 BTU/h (9.2 kW)|
|Average overall efficiency (EPA cribs / Douglas fir) : (3)||69.5 % (HHV) (4)||75.2 % (LHV) (5)|
|Average overall efficiency (dry cordwood) : (3)||N.A. (HHV) (4)||N.A. (LHV) (5)|
|Optimum efficiency : (6) (7)||77.2 %|
|Average particulate emissions rate : (8)||3.9 g/h|
|Average CO : (9)||137.4 g/h|
(1) Values are as measured per test method, except for the recommended heating area, firebox volume, maximum burn time and maximum heat output.
() Recommended heating area and maximum burn time may vary subject to location in home, chimney draft,heat loss factors, climate, fuel type and other variables. The recommended heated area for a given appliance is defined by the manufacturer as its capacity to maintain a minimum acceptable temperature in the designated area in case of a power failure.
(2) The maximum heat output (dry cordwood) is based on a loading density varying between 15 lb/ft³ and 20 lb/ft³. Other performances are based on a fuel load prescribed by the standard. The specified loading density varies between 7 lb/ft³ and 12 lb/ft³. The moisture content is between 19% and 25%.
(3) As measured per CSA B415.1-10 stack loss method.
(4) Higher Heating Value of the fuel.
(5) Lower Heating Value of the fuel.
(6) Performances based on a fuel load prescribed by the standard at 7 lb/ft³ and with a moisture content between 19% and 25%.
(7) Optimum overall efficiency at a specific burn rate (LHV).
(8) This appliance is officially tested and certified by an independent agency.
(9) Carbon monoxyde.
|Maximum log length||20"|
|Log positioning||Over width|
|Recommended chimney diameter||6"|
|Baffle type||High heat-resistant C-cast|
|Approved for a mobile home installation||No|
|Weight||421 lb (191 kg)|
|Door type||Single, glass with cast iron frame|
|Glass type||Ceramic glass|
|Glass surface – dimensions (Width X Height)||17 1/4" x 9 1/2"|
|Overall dimension (Height)||23 1/8"|
|Overall dimension (Width)||28 3/8"|
|Overall dimension (Depth)||26 1/2"|
|Door opening – dimension (Height)||9"|
|Door opening - dimension (Width)||17 1/2"|
|Firebox – dimension (Height)||11 7/8"|
|Firebox – dimension (Width)||21"|
|Firebox – dimension (Depth)||16 3/4"|
|Steel thickness – body||3/16"|
|Steel thickness – top||5/16"|
|Centre line of flue outlet to the side||13 1/2"|
|Centre line of flue outlet to the back||6 7/8"|
|Fireplace opening – minimum (Height)||23 3/8"|
|Fireplace opening – minimum (Width)||28 7/8"|
|Fireplace opening – minimum (Depth)||15 3/4"|
|USA standard (emissions)||EPA Method 28|
|Canadian standard (emissions)||CSA B415.1-10|
|USA standard (safety)||UL 1482, UL 737|
|Canadian standard (safety)||ULC S628|
|Tested and listed as per applicable standards||By an accredited laboratory (CAN/USA)|